ROFF
T01
Roff T01 NCA Tile Adhesive, Grey, 30 Kg Bag
PRISE 400.00
Material to be fixed.
All types of ceramic tile, terracotta, brick, vitrified tiles’, natural stones’, large format tile”, class lla, Ib & lll tiles as per 1513712: 2006.
On surface/ substrate.
Cement-based screeds. cement-based plasters, concrete surfaces, bricks, other cement-based surfaces.
Area of application.
Flooring and walls. for internal applications, for external area”, dry & wet area, domestic applications, commercial applications.
FEATURES AND ADVANTAGES:
Easy to use – just add water on site,ready to use.
Can be used in internal areas, for floor as well as wall application.
Water resistant – suitable for wet areas.
Good adhesive bond strength & Bonds to various cement-based substrates.
Self-curing properties, which allows hassle-free application with minimum Labor.
Low VOC – for healthy living.
Tentative Mixing Ratio (Powder: Water) = 3:1by volume 1:0.24
Mixed Density = Mixed Density
Open Time (IS 15477: 2019 = Approx. 20 minutes
Adjustability (IS 15477: 2019) = Approx. 20 minutes
PotLif = Approx. 20 minutes
Tensile Adhesion Strength as per EN1348 = 20.5N/mm*
VOC Content (EPA 24) = <4gm/kg
Application Temperature (substrates and materials) = 5Cto35C
Adhesive Thickness = 3-12mm
tting/ Trafficable/ Grouting Time = 24 hours
SUBSTRATE PREPARATION
The substrate must be level, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising. All surfaces must be plumb and true to within 6 mm in 10ft(3m). Dry, dusty surfaces should be dampened with water & excess water should be swept off. New concrete slabs shall be damp cured and 28 days old before application which will reduce the shrinkage from tile fixing surface. Expansion joints to be provided & filled with suitable sealant. Do not cover expansion joints with thin set tile adhesive/ tile.
MIXING
Add 3 – 3.5 parts of powder to 1part of water or 5 – 6 litre water for 20 kg powder in a clean mixing vessel. Adjust the water as per desired consistency. Mix with a suitable mechanical stirrer or slow speed drills (50 – 100 rpm) until a lump free homogeneous paste is obtained. Always mix required quantity, which can be consumed within pot life. Leave mixture for 5 minutes before use. No further water should be added.
LIMITATIONS
Do not apply directly to gypsum plaster or boards, fibre cement boards or other drywall partitions, plywood, chipboard, particleboard, decorative laminates or resilient flooring, metal, plastic, deformable surfaces or subject ‘to vibrations. Use Roff Extrofix/ Masterfix as per application.
Adhesives for ceramic tile, bricks and stone are not designed as replacements for waterproof coating. Use Roff waterproofing coating before tiling for wet area.
Do not use for fixing artificial/ nano/ engineered stone/ composites/ metal tile. Use Masterfix for the same.
